Helpful ReplyCutting and framing window in trailer

Junior Burger
  • Total Posts : 3
  • Joined: 2009/05/31 13:33:00
  • Location: sisseton, SD
  • Status: offline
2014/04/21 16:15:03 (permalink)

Cutting and framing window in trailer

My wall studs are shaped like a :L". 1in tubing and bottom of L the outside panels attached.  Do I cut that of and just leave the tubing for the framing? What would you use to cut the opening.  Will have to cut middle :L: stud completely.  How do I make sure everything is square to trailer?


Attached Image(s)

  • Total Posts : 246
  • Joined: 2013/10/13 11:26:00
  • Location: Denver, CO
  • Status: offline
Re:Cutting and framing window in trailer 2014/04/23 10:38:09 (permalink) ☄ Helpful
Yes, you will likely have to cut through those rails. You can use a Sawzall, a jig saw with a good metal blade, or a small circular saw or grinder with the appropriate blade.

These threads should help:
You might also want to check out PacMob's builds.
Jump to:
© 2017 APG vNext Commercial Version 5.5