THE WILD DOG
DR, I am going to mount a slide rail system in the back and slide the generator out when in use and close the door. ( cutting slats in the door to accommodate the rails). Another cool Idea I had was, since my door is going to open up about 4 feet only was to replace the white boards on the roll up with thick acrylic so that it can be see through on maybe 1-3 boards. Gives us a look out and ppl can glance in and see what's going on. Still just a thought though, not 100% on it. I have to upload some serious pics though. I haven't had much time to do that lately, but working on it.
Well we are all wanting pictures, to see your progress.
But what will your local HD say about your generator sitting inside (gas & Oil ) without being separated from the food service area during your moves or overnight? I'm not saying it's wrong just never heard of it before.
Don't you think you could make a good strong box to keep the local gang-bangers from stealing your generator and keep it in a permanent outside location? And then you'll not have to work that extra moving it in and out every move during the day or even at night just to close down.
I promise you the things that wear you out in the food vending business are the ordeal of set up and tear down. The part about prep, cooking and serving are a joy. But the BS stuff................... set up, tear down, every day wears the hell out of me.
I didn't mean to cause you to not take off your slide up door in previous post in fact I'd take it out in a heart beat. But you need to have a professional look to your truck. I think you can remove your slide up door and replace it with a wide steel door and make the area you fill in on both sides a advertising location. Kind of a billboard on the back of your truck. But what the hell you know that.
Here is a link that is very interesting on generators for vending: http://www.neon-john.net/...ack_55G/Quiet_home.htm
If you want to see bigger pictures go to the site and click on the pictures
The Generac QuietPack is a low speed timing belt-driven 5.5kw generator designed for RV service. It features single-side service, single location connections, remote-controllable and is one of the quietest generators I've ever tested. It uses the Briggs & Stratton Vanguard industrial V-twin 27 hp engine. Most of the lack of noise is achieved by the simple technique of only running the engine at about 2000 RPM. The two pole alternator is driven at 3600 RPM by means of a guaranteed-for-life timing belt and pulley system.
I purchased this generator from Advanced RV supply
. These guys have great prices and the price includes free shipping. For a device that weighs several hundred pounds, free shipping is a significant discount.
I bought this generator for use with my concession trailer. I needed a very quiet portable generator capable of supplying power to an all-electric concession stand. This generator fit the bill perfectly.
I mounted the generator on a garden cart for portability. Great idea but it didn't work out so well. The cart claimed to be rated for 1000 lbs of load (yeah, right!) The 300 lbs of generator fairly quickly collapsed the undercarriage. I replaced that stuff with some heavy duty pneumatic castors (not shown).
After many years of dealing with portable generators, I realized that one of the biggest operational hassles is fueling. Having to fuel a portable generator is a major hassle when operating for a day or more at a time. For safety, the generator should be shut down while refueling. This disrupts the operation of the concession stand. Plus it involves employees having to handle flammable gasoline.
Upon further consideration I realized that the outboard motor industry had long ago figured out how to safely handle gasoline. The portable tank and the quick coupler makes handling gasoline safe and convenient. Therefore I have rigged all my generators to use outboard motor fuel tanks.
In summary, I can say without doubt that this is the best and quietest portable generator I've ever tested. There isn't a whole lot more that I could ask for in a generator.
Let's take a photo tour. Be sure to REFRESH each page on this site as I'm adding content on a daily basis.
This photo shows the generator as it arrived.
The service panel is off. The V-twin engine is to the left. Note that it is completely enclosed in sound damping metal.
A closer shot showing several features. The oil change system is especially nice.
After having cursed the drain plug locations on various generators, I have nothing but praise for this system.
Another view showing yet more features.
As can be seen here, the oil change hose is simply unclipped, the cap removed
and the hose lowered into a suitable container.
Here is a closeup of the oil change system.
Here is where all the outside connections are made. Note the waterproof automotive-type connector for the remote controls. If you've ever fought to get heavy cables bent around to make the connections to an Onan, you'll really appreciate this battery connection.
The control panel. Note the heavy welded studs and anti-vibration nuts used to hold things together.
Here is a view of the fuel system.
The fuel hose is simply pushed through the grommet, slipped over the fuel filter nipple and the clamp tightened.
Note the superb Facet fuel pump. Very quiet and efficient.
If you've ever camped in cold weather you've probably experienced carburetor icing. With older Onans you just lived with it. Newer ones have a damper that directs warm air to the carb. Of course, you have to go outside to flip the lever.
Generac has a better idea. This photo shows the electric fuel cutoff that also serves as an electric carburetor heater. It applies heat right where it is needed - the emulsion tube. This deices the carb without the power hit that warm air causes.
A view of the inside of the control box. Note the single point ground system. This greatly reduces conducted electrical noise. Also note the RivNuts that receive the fasteners.
This device contains real threads. Much better than a punched hole and sheet metal screws like most manufacturers use.
A closer view of the control box. Note the quality high temperature wiring.
The generator cart is pictured above left. This is a shot of the electrical connections. I bypassed the internal breakers and installed an external breaker so that I don't have to remove the service panel to reset the breakers.
Another view of the connector panel. The QuietPack comes connected for 120 volt output but can be re-strapped for 240. I have mine strapped that way.
The panel features an RV 30 amp outlet, a 240 volt twist-lock and a convenience outlet.
This shows the generator deployed at a concession event. It is powering the concession stand, a commercial refrigerator and my RV. It is quiet enough to be located right next to the stand.
Note the outboard motor gas tank. This tank can be changed out for another without shutting down the generator.
post edited by Dr of BBQ - 2011/10/23 10:55:08